MySQL数据库压测有什么注意事项和FAQ
发布时间：2023-10-16 16:01:20 所属栏目：MySql教程 来源：
导读：下面讲讲关于MySQL数据库压测有哪些注意事项和FAQ，文字的奥妙在于贴近主题相关。所以，闲话就不谈了，我们直接看下文吧，相信看完MySQL数据库压测有哪些注意事项和FAQ这篇文章你一定会有所受益。
1.注意事项
1.注意事项
|
下面讲讲关于MySQL数据库压测有哪些注意事项和FAQ，文字的奥妙在于贴近主题相关。所以，闲话就不谈了，我们直接看下文吧，相信看完MySQL数据库压测有哪些注意事项和FAQ这篇文章你一定会有所受益。 1.注意事项 （1）.提前规划好具体要测试什么，即测试目的，比如 MySQL5.6与5.7的性能差异； 异步复制和半同步复制的TPS； 设置双1（innodb_flush_log_at_trx_commit=1、sync_binlog=1）性能对数据库性能影响多少； 确认即将上线的新业务对MySQL负载影响多少，是否能承载得住，是否需要对云服务器进行扩容或升级配置； MySQL数据库压测有哪些注意事项和FAQ (2).压力测试比较耗时，我们不可能时刻监督每次压测什么时候结束，然后手动的进行下一次测试，所以要写个脚本帮助我们一键测试； (3).根据测试环境的硬件配置给予机器适当的压力，对于有限的硬件配置，不能无限的增压，这样数据库里全是lock wait timeout等报错，最后会使MySQL Crash的。 2.FAQ 这一块主要讲测试的时候系统和数据库出现的问题，导致压测无法进行 (1)tpcc数据库在预热rampup时候的报错 sht-sgmhadoopcm-01:mysqladmin:/usr/local/mysql/tpcc-mysql-master/logs:>less tpcc_runlog_parameter_20180620234749_512_THREADS RAMP-UP TIME.(120 sec.) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 1461, 42000, Can't create more than max_prepared_stmt_count statements (current value: 16382) 解决方法： 错误很明显，参数max_prepared_stmt_count(默认16382)现在的大小已经无法满足负载需求了，这个参数是限制数据库中已经准备的statements数量，即sql数量，我们把它增大十倍。 sht-sgmhadoopdn-02.telenav.cn:mysqladmin:/usr/local/mysql/data:>vim /ect/my.cnf max_prepared_stmt_count = 163820 然后重启MySQL mysql> show variables like '%max_prepared_stmt_count%'; +-------------------------+-------+ | Variable_name | Value | +-------------------------+-------+ | max_prepared_stmt_count = | 163820 | +-------------------------+-------+ 参数官方解析： This variable limits the total number of prepared statements in the server. It can be used in environments where there is the potential for denial-of-service attacks based on running the server out of memory by preparing huge numbers of statements. If the value is set lower than the current number of prepared statements, existing statements are not affected and can be used, but no new statements can be prepared until the current number drops below the limit. The default value is 16,382. The permissible range of values is from 0 to 1 million. Setting the value to 0 disables prepared statements. (2)MySQL负载过高，导致crash 数据库日志也出现大量的日志信息： sht-sgmhadoopdn-02.telenav.cn:mysqladmin:/usr/local/mysql/data:>vim sht-sgmhadoopdn-01.err 2018-06-20T17:04:42.935422Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 5690ms. The settings might not be optimal. (flushed=1119 and evicted=0, during the time.) 2018-06-20T17:05:45.061790Z 0 [ERROR] Error in accept: Too many open files 2018-06-20T17:05:47.846070Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 5057ms. The settings might not be optimal. (flushed=912 and evicted=0, during the time.) 2018-06-20T17:06:09.564302Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4569ms. The settings might not be optimal. (flushed=913 and evicted=0, during the time.) 2018-06-20T17:06:35.456128Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 5822ms. The settings might not be optimal. (flushed=959 and evicted=0, during the time.) 2018-06-20T17:06:47.324711Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4312ms. The settings might not be optimal. (flushed=673 and evicted=0, during the time.) 2018-06-20T17:06:55.651725Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 5018ms. The settings might not be optimal. (flushed=592 and evicted=0, during the time.) 2018-06-20T17:07:09.104978Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4983ms. The settings might not be optimal. (flushed=936 and evicted=0, during the time.) 2018-06-20T17:07:21.873005Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4723ms. The settings might not be optimal. (flushed=677 and evicted=0, during the time.) 2018-06-20T17:07:40.903065Z 0 [Note] InnoDB: page_cleaner: 1000ms intended loop took 4432ms. The settings might not be optimal. (flushed=431 and evicted=0, during the time.) 2018-06-20T17:08:13.283422Z 1085 [ERROR] Can't generate a unique log-filename /usr/local/mysql/arch/mysql-bin.(1-999) 2018-06-20T17:08:13.283501Z 1085 [ERROR] mysqld: Binary logging not possible. Message: Either disk is full or file system is read only while rotating the binlog. Aborting the server. 17:08:13 UTC - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. Attempting to collect some information that could help diagnose the problem. As this is a crash and something is definitely wrong, the information collection process might fail. key_buffer_size=268435456 read_buffer_size=2097152 max_used_connections=981 max_threads=214 thread_count=981 connection_count=981 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1272281 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x7f55ddfa9710 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f55bac30ea8 thread_stack 0x40000 mysqld(my_print_stacktrace+0x35)[0xf4a495] mysqld(handle_fatal_signal+0x4a4)[0x7ce2f4] /lib64/libpthread.so.0(+0xf5e0)[0x7f5774a0b5e0] /lib64/libc.so.6(gsignal+0x37)[0x7f57733fd1f7] /lib64/libc.so.6(abort+0x148)[0x7f57733fe8e8] mysqld[0xee249a] mysqld(_ZN13MYSQL_BIN_LOG13new_file_implEbP28Format_description_log_event+0x50c)[0xeeec4c] mysqld(_ZN13MYSQL_BIN_LOG6rotateEbPb+0x3e)[0xeeed0e] mysqld(_ZN13MYSQL_BIN_LOG14ordered_commitEP3THDbb+0x497)[0xef1137] mysqld(_ZN13MYSQL_BIN_LOG6commitEP3THDb+0x585)[0xef1825] mysqld(_Z15ha_commit_transP3THDbb+0x174)[0x81f594] mysqld(_Z12trans_commitP3THD+0x49)[0xdd1589] mysqld(_Z21mysql_execute_commandP3THDb+0x2be0)[0xd186d0] mysqld(_Z11mysql_parseP3THDP12Parser_state+0x40d)[0xd1af7d] mysqld(_Z16dispatch_commandP3THDPK8COM_DATA19enum_server_command+0x119a)[0xd1c19a] mysqld(_Z10do_commandP3THD+0x194)[0xd1d044] mysqld(handle_connection+0x29c)[0xded7ac] mysqld(pfs_spawn_thread+0x174)[0xf707b4] /lib64/libpthread.so.0(+0x7e25)[0x7f5774a03e25] /lib64/libc.so.6(clone+0x6d)[0x7f57734c034d] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f55de4918b0): is an invalid pointer Connection ID (thread ID): 1085 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 解决方法： 建议：不要给与数据库太大的压力，控制好thread并发数 (3)linux某一用户达到max user processes后，导致暂时无法使用该用户mysqladmin登录和无法使用任何bash命令 -bash-4.2$ sudo su mysqladmin su: failed to execute /bin/bash: Resource temporarily unavailable sht-sgmhadoopcm-01:mysqladmin:/usr/local/mysql/tpcc-mysql-master/logs:>ls bash: fork: retry: No child processes bash: fork: retry: No child processes bash: fork: retry: No child processes bash: fork: retry: No child processes bash: fork: Resource temporarily unavailable 解决方法： 查看系统的一些限制设置，发现max user processes 只有4096，进程被用完，所以无论写入什么命令，系统都无法及时作出响应 [root@sht-sgmhadoopcm-01 ~]# ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 31207 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 65536 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 4096 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited [root@sht-sgmhadoopcm-01 ~]# vim /etc/security/limits.conf * soft nproc 65536 * hard nproc 65536 * soft nofile 65536 * hard nofile 65536 还需要修改一个默认的配置文件才能真正的生效： [root@sht-sgmhadoopcm-01 ~]# vim /etc/security/limits.d/20-nproc.conf # Default limit for number of user's processes to prevent # accidental fork bombs. # See rhbz #432903 for reasoning. * soft nproc 65536 #把这里的4096改大为65536或者为unlimited root soft nproc unlimited 查看已经生效： sht-sgmhadoopcm-01:mysqladmin:/usr/local/mysql/tpcc-mysql-master/logs:>ulimit -u 65536 （4）并发太大，导致大量的lock 当线程数达到1536及以上的时候，日志中出现大量的lock信息： $less tpcc_runlog_parameter_20180621170023_1536_THREADS payment 1466:1 payment 247:1 1205, HY000, Lock wait timeout exceeded; try restarting transaction 1205, HY000, Lock wait timeout exceeded; try restarting transaction payment 954:1 1205, HY000, Lock wait timeout exceeded; try restarting transaction payment 485:1 1205, HY000, Lock wait timeout exceeded; try restarting transaction payment 266:1 1205, HY000, Lock wait timeout exceeded; try restarting transaction ...... ....... 2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104 2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104 2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104 2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104 2013, HY000, Lost connection to MySQL server at 'reading initial communication packet', system error: 104 解决方法： 此时查看MySQL中的一些Lock状态信息,可以看出来全部都是一些x锁，说明现在并发过大，导致数据库处理不过来，产生大量排它锁。 mysql> select * from INFORMATION_SCHEMA.INNODB_LOCKS; +------------------+-------------+-----------+-----------+----------------------+------------+------------+-----------+----------+-----------+ | lock_id | lock_trx_id | lock_mode | lock_type | lock_table | lock_index | lock_space | lock_page | lock_rec | lock_data | +------------------+-------------+-----------+-----------+----------------------+------------+------------+-----------+----------+-----------+ | 15043927:63:3:8 | 15043927 | X | RECORD | `tpccdb`.`warehouse` | PRIMARY | 63 | 3 | 8 | 7 | | 15043750:63:3:8 | 15043750 | X | RECORD | `tpccdb`.`warehouse` | PRIMARY | 63 | 3 | 8 | 7 | | 15043742:63:3:8 | 15043742 | X | RECORD | `tpccdb`.`warehouse` | PRIMARY | 63 | 3 | 8 | 7 | | 15043700:63:3:8 | 15043700 | X | RECORD | `tpccdb`.`warehouse` | PRIMARY | 63 | 3 | 8 | 7 | | 15043656:63:3:8 | 15043656 | X | RECORD | `tpccdb`.`warehouse` | PRIMARY | 63 | 3 | 8 | 7 | | 15043646:63:3:8 | 15043646 | X | RECORD | `tpccdb`.`warehouse` | PRIMARY | 63 | 3 | 8 | 7 | | 15043607:63:3:8 | 15043607 | X | RECORD | `tpccdb`.`warehouse` | PRIMARY | 63 | 3 | 8 | 7 | | 15043399:63:3:8 | 15043399 | X | RECORD | `tpccdb`.`warehouse` | PRIMARY | 63 | 3 | 8 | 7 | | 15043388:63:3:8 | 15043388 | X | RECORD | `tpccdb`.`warehouse` | PRIMARY | 63 | 3 | 8 | 7 | ...... | 15043727:64:3:56 | 15043727 | X | RECORD | `tpccdb`.`district` | PRIMARY | 64 | 3 | 56 | 6, 5 | | 15035687:64:3:62 | 15035687 | X | RECORD | `tpccdb`.`district` | PRIMARY | 64 | 3 | 62 | 7, 1 | | 15043855:64:3:62 | 15043855 | X | RECORD | `tpccdb`.`district` | PRIMARY | 64 | 3 | 62 | 7, 1 | | 15032784:64:3:56 | 15032784 | X | RECORD | `tpccdb`.`district` | PRIMARY | 64 | 3 | 56 | 6, 5 | +------------------+-------------+-----------+-----------+----------------------+------------+------------+-----------+----------+-----------+ 1756 rows in set, 1 warning (3.87 sec) 建议：不要给与数据库太大的压力，控制好thread并发数 (5)由于磁盘空间不足，导致OS和MySQL相关报错 在启动MySQL的时候err日志报的错误： sht-sgmhadoopdn-01.telenav.cn:mysqladmin:/usr/local/mysql/data:>tail -f hostname.err 2018-06-23T08:21:35.417981Z 0 [Note] --secure-file-priv is set to NULL. Operations related to importing and exporting data are disabled 2018-06-23T08:21:35.418138Z 0 [Note] mysqld (mysqld 5.7.21-log) starting as process 16512 ... 2018-06-23T08:21:35.438102Z 0 [Note] InnoDB: PUNCH HOLE support available 2018-06-23T08:21:35.438190Z 0 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2018-06-23T08:21:35.438202Z 0 [Note] InnoDB: Uses event mutexes 2018-06-23T08:21:35.438242Z 0 [Note] InnoDB: GCC builtin __sync_synchronize() is used for memory barrier 2018-06-23T08:21:35.438340Z 0 [Note] InnoDB: Compressed tables use zlib 1.2.3 2018-06-23T08:21:35.438390Z 0 [Note] InnoDB: Using Linux native AIO 2018-06-23T08:21:35.449551Z 0 [Note] InnoDB: Number of pools: 1 2018-06-23T08:21:35.449862Z 0 [Note] InnoDB: Using CPU crc32 instructions 2018-06-23T08:21:35.456460Z 0 [Note] InnoDB: Initializing buffer pool, total size = 5G, instances = 8, chunk size = 128M 2018-06-23T08:21:36.274392Z 0 [Note] InnoDB: Completed initialization of buffer pool 2018-06-23T08:21:36.426894Z 0 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority(). 2018-06-23T08:21:36.441471Z 0 [Note] InnoDB: Opened 3 undo tablespaces 2018-06-23T08:21:36.441504Z 0 [Note] InnoDB: 3 undo tablespaces made active 2018-06-23T08:21:36.441913Z 0 [Note] InnoDB: Highest supported file format is Barracuda. 2018-06-23T08:21:36.629202Z 0 [Note] InnoDB: Creating shared tablespace for temporary tables 2018-06-23T08:21:36.629339Z 0 [Note] InnoDB: Setting file '/usr/local/mysql/data/ibtmp1' size to 12 MB. Physically writing the file full; Please wait ... 2018-06-23T08:21:36.646819Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 794624 bytes written. Retrying for the remaining bytes. 2018-06-23T08:21:36.790869Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 921600 bytes written. Retrying for the remaining bytes. 2018-06-23T08:21:38.380026Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 925696 bytes written. Retrying for the remaining bytes. 2018-06-23T08:21:38.390611Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 929792 bytes written. Retrying for the remaining bytes. 2018-06-23T08:21:38.399767Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 933888 bytes written. Retrying for the remaining bytes. 2018-06-23T08:21:38.412285Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 937984 bytes written. Retrying for the remaining bytes. 2018-06-23T08:21:38.419670Z 0 [Warning] InnoDB: 1048576 bytes should have been written. Only 942080 bytes written. Retrying for the remaining bytes. 2018-06-23T08:21:38.436278Z 0 [Warning] InnoDB: Retry attempts for writing partial data failed. 2018-06-23T08:21:38.436345Z 0 [ERROR] InnoDB: Write to file /usr/local/mysql/data/ibtmp1failed at offset 11534336, 1048576 bytes should have been written, only 942080 were written. Operating system error number 28. Check that your OS and file system support files of this size. Check also that the disk is not full or a disk quota exceeded. 2018-06-23T08:21:38.436408Z 0 [ERROR] InnoDB: Error number 28 means 'No space left on device' 2018-06-23T08:21:38.436426Z 0 [Note] InnoDB: Some operating system error numbers are described at http://dev.mysql.com/doc/refman/5.7/en/operating-system-error-codes.html 2018-06-23T08:21:38.436442Z 0 [ERROR] InnoDB: Could not set the file size of '/usr/local/mysql/data/ibtmp1'. Probably out of disk space 2018-06-23T08:21:38.436457Z 0 [ERROR] InnoDB: Unable to create the shared innodb_temporary 2018-06-23T08:21:38.436467Z 0 [ERROR] InnoDB: Plugin initialization aborted with error Generic error 2018-06-23T08:21:39.040518Z 0 [Note] InnoDB: Removed temporary tablespace data file: "ibtmp1" 2018-06-23T08:21:39.040570Z 0 [ERROR] Plugin 'InnoDB' init function returned error. 2018-06-23T08:21:39.040581Z 0 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 2018-06-23T08:21:39.040597Z 0 [ERROR] Failed to initialize builtin plugins. 2018-06-23T08:21:39.040673Z 0 [ERROR] Aborting 2018-06-23T08:21:39.040699Z 0 [Note] Binlog end 2018-06-23T08:21:39.041472Z 0 [Note] mysqld: Shutdown complete 从库同步也会遇到错误: root@localhost [(none)]>show slave status\G *************************** 1. row *************************** Slave_IO_State: Reconnecting after a failed master event read Master_Host: 172.16.101.58 Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin.000041 Read_Master_Log_Pos: 245615 Relay_Log_File: relay-bin.000025 Relay_Log_Pos: 925225142 Relay_Master_Log_File: mysql-bin.000014 Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 925224929 Relay_Log_Space: 21652623260 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 123889 Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 2003 Last_IO_Error: error reconnecting to master 'repl@172.16.101.58:3306' - retry-time: 60 retries: 119 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 583306 Master_UUID: 7dac3e2a-7789-11e8-ae76-0050568211bd Master_Info_File: mysql.slave_master_info SQL_Delay: 0 SQL_Remaining_Delay: NULL Slave_SQL_Running_State: System lock Master_Retry_Count: 86400 Master_Bind: Last_IO_Error_Timestamp: 180626 11:26:30 Last_SQL_Error_Timestamp: Master_SSL_Crl: Master_SSL_Crlpath: Retrieved_Gtid_Set: 7dac3e2a-7789-11e8-ae76-0050568211bd:9-6216578 Executed_Gtid_Set: 7dac3e2a-7789-11e8-ae76-0050568211bd:1-1912222 Auto_Position: 1 Replicate_Rewrite_DB: Channel_Name: Master_TLS_Version: 1 row in set (0.00 sec) TPCC压测时候的日志报错 sht-sgmhadoopcm-01:mysqladmin:/usr/local/mysql/tpcc-mysql-master/logs:>less tpcc_runlog_parameter_20180625075957_1024_THREADS delivery 241:5 1114, HY000, The table 'order_line' is full delivery 823:5 1114, HY000, The table 'order_line' is full delivery 618:5 ...... ...... 使用vim打开一个文件的时候报错 E297: Write error in swap file "hostname.err" [noeol] 3437L, 417792C Press ENTER or type command to continu 解决方法： sht-sgmhadoopdn-01.telenav.cn:mysqladmin:/usr/local/mysql/data:>df -Th Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/centos-root xfs 77G 77G 12M 100% / devtmpfs devtmpfs 2.9G 0 2.9G 0% /dev tmpfs tmpfs 2.9G 0 2.9G 0% /dev/shm tmpfs tmpfs 2.9G 65M 2.8G 3% /run tmpfs tmpfs 2.9G 0 2.9G 0% /sys/fs/cgroup /dev/sda1 xfs 497M 132M 366M 27% /boot 建议：删除无用的文件释放disk space,或者mount一个更大的磁盘 （编辑：聊城站长网） 【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容! |
推荐文章
站长推荐
